banner inner

Content

Frequently Asked Questions

 

My Host is showing as offline

In most cases, restarting your Host computer will solve offline issues. If you continue to see your Host as offline after a restart, please contact Route1 This email address is being protected from spambots. You need JavaScript enabled to view it. for further troubleshooting assistance.

I forgot my password

MC2
If you have enrolled in Password Reset prior to forgetting your MobiNET password, please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for assistance with resetting your MobiNET password.

If you have not enrolled in Password Reset, or Password Reset is not available to your organization, please contact your MobiKEY Administrator or This email address is being protected from spambots. You need JavaScript enabled to view it. for a replacement MC2 device.

For security reasons, your MobiNET password cannot be retrieved by Route1.

MobiKEY for iPad
If you have forgotten your MobiNET password for the MobiKEY app, please delete the application and install again. You will need to perform the Registration and Host pairing steps again. For security reasons, your MobiNET password cannot be retrieved by Route1.

MobiKEY Fusion / MobiKEY Fusion A2T / TAC
Please contact your ID Card Administrator should you require assistance with resetting your PIN. For security reasons, your PIN cannot be retrieved by Route1.

How can I change my MobiNET password?

MC2/ MobiKEY for iPad
You may change your MobiNET password during login. You will need to provide your current password and select Change password on successful login. For security reasons, your MobiNET password cannot be retrieved by Route1.

MobiKEY Fusion / MobiKEY Fusion A2T / TAC
Please contact your ID Card Administrator should you require assistance with changing your PIN. For security reasons, your PIN cannot be retrieved by Route1.

Where can I find my MobiNET ID and domain?

MC2/ MobiKEY Fusion
Your MobiNET ID and domain can be found on the bottom of the MobiKEY UI after successful login.
This information will be available just below the Host List.

MobiKEY for iPad / MobiKEY Fusion A2T / TAC
Your MobiNET ID and domain can be found by logging into your MobiKEY app and going to the Settings menu and selecting the Troubleshooting tab.

How can I remove a Host from my Host List?

At times, you may wish to remove a particular Host from your Host list. You may either contact your Organization’s MobiKEY Administrator or This email address is being protected from spambots. You need JavaScript enabled to view it. team to have the Host name removed from your Host list, or manually remove the Host from the Host UI -

  1. Open the MobiAgent UI on the Host computer you wish to remove from your Host list.
  2. Select the Manage Users tab. You will be prompted for the MobiNET password associated with the Host owner.
  3. Select the MobiNET ID of the Remote you wish you remove authorization for from this Host computer and click on the Revoke button. A confirmation pop-up will appear to ensure you are ready to remove the association between the Host and Remote.
  4. Once the process is complete, you will no longer see this Host on your Host list.

Can I use multiple monitors?

The MobiKEY Technology supports multiple monitors on the Host computer. During your data session, you may switch between your Host monitors by selecting the corresponding monitor icon from the MobiKEY Taskbar.

The Remote asset currently only supports a single monitor.

I want to install the Host on a Mac OS X computer

The MobiNET Agent software is currently only available for Windows OS computers.

I have received a replacement MobiKEY Enabling Device, what now?

MC2
If you have received a replacement MC2 device, you have two options as to how to proceed -

  1. Register your MC2 device, during which process you will be issued a new MobiNET ID, and pair your new MC2 to your existing Host computer. You will require the password of the MobiNET ID that had originally installed the Host software to complete the pairing process.
  2. Uninstall your current MobiNET Agent on your Host computer and proceed to Register your MC2 device and add Host. This will install the MobiNET Agent software on your Host computer again, but will not require the previous account password. The newly installed MobiNET Agent software will be linked to your new MobiNET ID. NOTE: uninstalling the existing MobiNET Agent will automatically revoke existing Remote pairings to this Host. If there are any other Remotes paired to this Host, one the new installation is complete, each Remote will need to be paired again.

MobiKEY Fusion/ MobiKEY Fusion A2T/TAC
If you have received a new MobiKEY Fusion/MobiKEY Fusion A2T or TactivoTM device, you may simply start using the device with your ID card. Your MobiNET ID is linked to your ID card, and not to the device itself.

How can I update my MobiKEY Enabling Device and Host?

Your MobiKEY Enabling Device will automatically prompt you when there is a new MobiKEY update available.

To update your MobiNET Agent software, you can either do so from your MC2 or by downloading the update files from our ticket site.

Host update from MC2:
  1. Insert your MC2 into the USB port of your Host computer. If the MobiKEY application software does not start automatically, open Windows Explorer, locate the MobiKEY application software in the newly mounted drive, and manually launch it.
  2. Upon successful login, click on Add Host and select This Computer. The MC2 will verify the current version of the MobiNET Agent software and prompt you if an update is available.
  3. Follow the onscreen prompts for the Update Wizard. NOTE: You must first update your MC2 before the latest version of the MobiNET Agent software will be available to you using this method.
Host update from ticket site:
  1. Using a web browser, go to http://mobiupdate.route1.net
  2. Read the license agreement, and then click the YES checkbox.
  3. Enter the case sensitive ticket number* for the Host computer MobiNET Agent update and click Download Software. The file download dialog box appears.
  4. To save the file to your desktop, click Save As and select you destination location.
  5. When the download is complete, click Close to close the download dialog box.
  6. Double-click the MobiNET Agent file you have just downloaded. The update wizard will run and update the MobiNET Agent software on the Host computer.
  7. Reboot the Host computer when prompted.

*Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for the required ticket number.

Mouse movements on an iPad

Mouse Button
  • The mouse button enables and disables mouse interactions with the data session. If a user wishes to position his screen without the risk of accidentally clicking and performing actions then he/she can disable mouse actions temporarily.
Left Clicking
  • Tap to single left click.
Right Clicking
  • Tap and hold at the desired location to perform a right click
Resizing and Moving the Screen
  • The data session window can be thought of as being locked in place. To unlock it you must perform a pinching action. This will also allow zooming the screen.
  • To reposition the screen, pinch the screen and reposition to the desired location.
  • To resize the screen, tap on the window edge and pan to the desired location.
  • To move a window, tap the window top bar and pan to the desired location.

NOTE: the tap, and pan to click, and drag movements are to be done in one fluid motion. This may take some getting used to and practice

I am experiencing latency with the MobiKEY data session

The MobiKEY technology is ISP dependent. In lower bandwidth environments, you may experience latency within a MobiKEY data session. The following configurations may be changed to improve your MobiKEY data session quality:

MC2/MobiKEY Fusion
  1. Login to your MobiKEY Enabling Device.
  2. Open the Settings dialogue from the top menu
  3. Select the Host Session tab from the Settings menu.
  4. Adjust the Color Quality (bit depth) to Low (8-bit) and click Apply and OK to close the settings dialogue.
  5. If either of your Host or Guest computer is known to be slow, please follow Steps 1 through 4 above, as well as the following, also from the Host Session tab: adjust the Encryption Key Length to AES-128 and click Apply and OK to close the settings dialogue.

NOTE: Not all MobiKEY users will have this option available. Availability of this option is an organizational decision.

NOTE: If you made these changes while a MobiKEY data session was open, please end the MobiKEY data session and restart it for the changes to be applied.

MobiKEY for iPad / MobiKEY Fusion A2T / TAC
  1. Login to your MobiKEY app.
  2. Open the Settings tab from the top menu.
  3. Adjust the Color Quality (bit depth) to Low (8-bit) and tap Done to close the Settings dialogue.
  4. If either of your Host or Guest asset is known to be slow, please follow Steps 1 through 4 above, as well as the following, also from the Settings tab: adjust the Encryption Key Length to AES-128 and tap Done to close the Settings tab.

NOTE: Not all MobiKEY users will have this option available. Availability of this option is an organizational decision.

NOTE: If you made these changes while a MobiKEY data session was open, please end the MobiKEY data session and restart it for the changes to be applied.

Host Computer Using Windows Vista or Windows 7
  1. Right click on the Desktop and select Screen resolution.
  2. From the Resolution drop down menu select the lowest setting available.
  3. Click on the Apply and OK buttons to close the dialogue window.
Host Computer Using Windows XP
  1. Right click on the Desktop and select Properties.
  2. Select the Settings tab at the top right of the Display Properties window.
  3. In the Color Quality drop-down menu select the lowest setting available.
  4. Under Screen Resolution, drag the slider to the far left side to the lowest setting available.
  5. Click on the OK button and accept the changes once the pop up confirmation dialogue windows opens.

NOTE: These instructions can often be performed during a MobiKEY data session; however, some Windows Vista and Windows 7 systems may not be setup to allow this. If you find that you cannot change your screen resolution in from within a MobiKEY data session, you may need direct access to your Host computer to perform the above noted steps.

Twitter Updates

Find Us On

  • linkedin
  • twitter
  • facebook icon 30x30
  • 6ip6xX44Tb
  • Google Plus b

Copyright © 2017 Route1, Inc. All Rights Reserved.